1. Vibration of the dryer cylinder: Two factors have caused this problem. One is that the wheel part of the equipment and the connecting part of the connecting base are damaged. It is not difficult to correct and harden. In addition, the tire roller is worn sideways. This problem can be achieved by turning or replacing parts.
2. The material does not reach the required level after drying. In order to deal with this problem, a simple method is to increase the efficiency of the dryer, thereby increasing or decreasing the heat.
3. Damage caused by gears and gears. There are three reasons: putting on the supporting wheel, blocking wheel and gear. Regarding this issue, what is to be done is to check the wear. If it is serious, you need to change the wheels. Otherwise, you only need to do some turning work. You can also install the device in the opposite direction. If you are concerned about instability, you can change to a new pair.
However, this continuous operation makes the tray dryer easy to adjust and have strong applicability: by adjusting the thickness of the material layer, the speed of the main shaft, the number of rake arms, the type and size of the rake leaves, the drying process can be achieved as it should be ability. Each layer of drying tray can be fed with hot or cold medium separately to heat or cool the materials and control the temperature of the materials.
https://www.stordworkshop.com
