1. It is strictly forbidden to reverse the device to prevent damage to the device.
2. It is strictly forbidden to rinse the equipment with cold water when the temperature of the disk surface is greater than 70 degrees
3. The steam pressure is set to ≤0.4Mpa, and the use of overpressure is strictly prohibited.
4. Before passing steam, the bypass drain valve must be opened to drain the condensate in the dryer.
2. Check the system for leaks with water or steam before starting the drive. It is acceptable to keep the pressure for 30 minutes under the operating pressure without leakage.
https://www.stordworkshop.com
