Operational simplicity
1. Easy to start and stop: The disc dryer is very simple to start and stop, without complicated steps. After stopping the feeding, the rakes that convey the material can quickly empty the material in the dryer.
2. Flexible parameter adjustment: By adjusting parameters such as material layer thickness, spindle speed, number and type of rakes, the drying process can be easily controlled to achieve the ideal drying effect.
3. Convenient cleaning and observation: The equipment is equipped with special large-size inspection doors and mirrors to facilitate cleaning the inside of the equipment and observing the drying of the material.
Operation process
1. Pre-start inspection: Make sure there are no obstacles around the equipment, check whether the power supply, air source, water source, etc. are normal, and check whether all parts of the equipment are intact.
2. Feeding operation: According to production requirements, add the material to be dried to the feed port, pay attention to controlling the feeding speed, and avoid excessive equipment load.
3. Adjust parameters: According to the nature of the material and drying requirements, adjust various parameters such as inlet temperature, outlet temperature, speed, etc. 4. Observe the operation: During the operation, closely observe the operating status of the equipment, such as temperature, pressure, material flow, etc. If there is any abnormality, stop the machine immediately for inspection.
5. Shutdown operation: After completing the drying task, first close the feed valve, gradually reduce the parameters to the set value, and finally turn off the power. Clean the residual materials inside the equipment after shutdown.
Maintenance and precautions
1. Regular inspection and cleaning: Regularly check the tightness, sealing and lubrication of each component of the equipment, replace damaged or aging components in time, and clean the surface and interior of the equipment.
2. Safe operation: Pay attention to safety and avoid dangerous situations such as electric shock and burns. People who are not familiar with the equipment should operate under the guidance of professionals.
3. Follow the operation manual: Strictly operate and maintain in accordance with the operation manual and safety specifications provided by the manufacturer.
