1. When the sludge drying equipment has abnormal sound, first check whether the gear teeth are consistent. When adjusting the first gear gap with excessive gear gap, moderate adjustment can discharge the abnormal sound. When the gear is severely worn, the adjustment failure must be deleted and replaced immediately .
2. If the gear bearing is very large, it will also make abnormal noises. The roller shafts of the same group are not parallel to the surface or are not directly connected to the cylinder. The gears are too large and abnormally worn due to the gear bearings. This situation must be corrected by the correct direction of the teeth. If it is more serious, disassemble it immediately, and the more worn gear
3. Keep the feed balance and stability. The feed volume should not be too high or too low, otherwise the cylinder is unbalanced front and back and left and right, and the sludge drying machinery and equipment will make abnormal noises.
