The bearing parts of the dryer carrying the slurry must always be lubricated. Frequent lubrication can increase the life of the sludge dryer bearing and improve the efficiency of the slurry dryer. It should be noted that the oil used to lubricate the bearing must be cleaned and has good sealing performance. For the lubrication parts in the slurry air dryer, they are the flip bearings, transmission gears, induction electrification bearings and drive plan views.
For newly installed tires, they are very easy to shake during the whole process of the sludge dryer; therefore, you should always check them. In addition, you should always pay attention to the working conditions of spare parts. If it is severely worn out, new parts should be replaced. If there is dirt on the surface, such as dust or metal materials, the theme activity bearing must not be moved on the chassis of the car, otherwise, a major accident may occur.
If the water temperature is very high during the whole process of the sludge air dryer, the equipment should be turned off immediately and this common fault should be dealt with. If there is a knocking sound during the whole process of rotating the transmission gear, the sludge dryer should be turned off immediately.
