The correct operation method of the disc dryer

First of all, users need to pay attention to that, before starting the disc dryer, check the fuel, tools, and transmission support devices to lubricate all bearings and friction surfaces, and it is necessary to ignite the stove one hour before starting the disc dryer, and return it before igniting the stove. The furnace, grate, feeding device, combustion chamber, slag in the furnace pit, furnace door, air duct, regulating valve and blower, dust collector, etc. should be checked first, and all accessory equipment, including the transmission parts of the dryer , Support and tow parts, etc., should be fastened, normal and reliable before driving. Next, let's look at the correct operation steps of the tray dryer. First start the motor of the dryer equipment, then start the wet material transportation equipment, and then start the dry material transportation equipment to form a continuous and uniform operation program. In addition, it should be noted that the temperature of each part of the bearing should be checked frequently during the operation of the dryer. The temperature should not exceed 50℃. The gear acoustic response should be stable. There should be no obvious impact, vibration and transmission in the transmission, support and cylinder rotation. The inspection, maintenance and maintenance of the equipment should be done frequently.https://www.stordworkshop.com/