The lack of lubricating agent during the application of the tube bundle dryer will constitute a severe conflicting appearance of the bearing during operation, and the bearing will be heated and damaged after severe wear; the operating environment of the tube bundle dryer is more applicable, so it can be used in Efficient consumption in the same consumption environment. When the adjacent dust material particles enter the bearing equipment, the bearing will be dirty, and if the bearing has not been cleaned for a long time, the material dust will accumulate, which will form the appearance of overheating of the bearing of the tube bundle dryer.
Disposal method of bearing heat of tube bundle dryer: In the application of tube bundle dryer, pay attention to the maintenance and maintenance of the slag dryer during the current period, add and clean the lubricating agent according to the operation cycle of the equipment, to ensure the bearing operation flexibility.
When adding lubricating agent, pay attention to ensure the cleanliness of the lubricating agent, add it properly, and do not add too much at one time to constitute a lubricant overflow purification bearing. When more dust materials accumulate inside the bearing, the bearing should be disassembled and cleaned up in time to prevent excessive accumulation of dust and blockage of the bearing.
https://www.stordworkshop.com
