1. Adequate heat exchange, low heat consumption, high efficiency and energy saving, wide range of drying materials, large processing capacity, large water evaporation, and can dry high-moisture materials.
2. Driven by a variable frequency motor, the power consumption can be saved by more than 30% compared with the traditional tube bundle.
3. The machine has less additional supporting equipment, small floor space, compact process layout, and can be placed in a single-storey factory building, which greatly saves civil construction costs.
In addition to the above features, compared with the traditional tube bundle dryer, it also has the following features:
4. The materials are thoroughly mixed in the drum without residual materials.
5. Since the heat exchange tube does not bear the torque when the drum rotates, the risk of cracking and leakage of the weld seam due to the torque transmission of the heat exchange tube is reduced, and the service life of the equipment is greatly improved; if the tube leaks, etc. The tube can be easily replaced at will.
6. The wall thickness of the drum barrel is 12-18 mm, and the conventional tube bundle shell is generally 6 mm thick. Under the same degree of wear and corrosion, the life of the barrel can be doubled.
7. Allow starting with materials.
8. It can be operated continuously (that is, with a high degree of automation) or intermittently (suitable for special processes).
