When using multiple mesh belt conveyors to jointly transport materials or a certain process, a central control console should be set up for centralized control. The control of the mesh belt conveyor line is necessary to ensure that the transmission function and action are reliable, and it can quickly block the power supply and shut down safely under urgent conditions. In order to complete the control, it is necessary to set the equipment for sound and light signal to display the starting and stopping status of the single machine and the action status of the incident switch.
The mesh belt conveyor in the mesh belt conveyor line should be started machine by machine in accordance with the reverse material flow direction. Delayed machine-by-machine shutdown along the material flow direction. On the premise of ensuring that there is no overflow, they also promise to start or brake together. It is necessary to interlock the equipment in the mesh belt conveyor line. In the meantime, if one of the mesh belt conveyors fails, the mesh belt conveyor upstream of its material flow should be shut down immediately. Interlocking devices are prohibited to be modified or removed at will.
The mesh belt conveyor line or the mesh belt conveyor used in the narrow and non-open area of the channel should be provided with an urgent pull switch along the line. It is necessary for the net belt conveyor line to receive the net belt conveyor with a transport volume greater than or equal to the feed net belt conveyor transport volume.
During reversible transportation, the delivery volume of the receiving mesh belt conveyor should be equal to that of the feeding mesh belt conveyor, but when the material is reversed, the transportation volume of the receiving mesh belt conveyor should be twice that of the feeding mesh belt conveyor. It is necessary to have one or more emergency shutdown switches or equipment in the vicinity of the operation location of the loading station at the transfer point. It is strictly prohibited to stack materials and other commodities. It is necessary to set sound and light signals when starting the belt conveyor remotely. The signal indication should be located at an address where the operator's sight and hearing are accessible.
https://www.stordworkshop.com/
