1. Before installation, please read the main engine and auxiliary engine manuals and related documents carefully, and formulate a detailed installation plan. Before installation, please check the quantity and completeness of all equipment one by one according to the packing list. Check for foreign objects inside and outside the device.
2. Check the strength, size, elevation, flatness, anchor holes, etc. of each foundation to meet the design requirements. Clean or blow foundation surfaces and bolts of buried holes to remove debris, grease and ash.
3. Three-phase four-wire system 380V, 50Hz power supply, the voltage fluctuation cannot exceed 10%.
4. The air humidity is not more than 95%.
5. Electrical appliances and dryers need to be effectively grounded.
6. Use insulation for steam pipes and dryers to avoid accidents such as burns.
7. The humidity of the installation environment should be appropriate, and it should not be too humid to avoid electrical short circuit and rust on the casing.
8. It is not easy to install in dusty places such as wood chips and grinders, and block the radiator.
9. Do not install this product in a place with objects to avoid accidents.
