1. The capacity required by the design of the disc dryer will adversely affect the normal use of downstream equipment. If the operation needs to be stopped during production and operation, the ability to continue to extract materials from it will prevent maintenance and possible safety issues. Since drying is a thermal process, accumulation or stopping of materials in the dryer will cause unstable process conditions.
2. It is a key step to have good products enter the dryer and then take them out. Moreover, providing reliable equipment upstream of the dryer to provide consistent products, both in moisture content and consistent feed rate, is essential for successful dryer performance. The system that feeds the material into the dryer is very important for the consistency of the product flow, and the inconsistent product flow enters the dryer to produce inconsistent drying results.
3. The key and important factor in the specifications of the disc dryer is the moisture that must be designed. After installation, the opportunity to adjust or increase the moisture that the dryer can handle is limited. The bad situation of the installation of the dryer is in the design and specification Calculation or estimation of phase proof of insufficient moisture.
