Increasing the hot gas flow of the tube bundle dryer can increase the working efficiency of the lifting plate. To increase the steam flow rate, a reasonable exhaust air extraction and dust removal system and a heating air system must be used.
The total pressure and air volume of the exhaust fan must be appropriate. If the total pressure is too low and the air volume is too small, it will directly affect the air extraction and reduce the output of the dryer; if the total pressure is too high and the air volume is too large, it will directly increase the power loss , And it will also increase the temperature of the exhaust gas from the machine a lot, increasing the heat loss.
It is necessary to increase the heat preservation of the cylinder, use a boiling furnace to supply heat, and increase the temperature gradient. Strengthen the heat preservation of the cylinder, use a boiling furnace to supply heat, increase the temperature difference between the gas and the solid phase, and increase the temperature gradient. Increase the hot air flow rate of the dryer and increase the hot air flow rate.https://www.stordworkshop.com/
