1. Due to its simple structure, the dryer rarely fails under normal use. For the newly put into use sludge dryer, the lubricating oil shall be replaced in time according to the requirements of the reducer manual, and the lubricating oil shall be added regularly to keep the oil level normal in the future. The bearings at both ends of the blade shaft have been greased at the factory, and grease (synthetic composite aluminum-based grease) should be added at least half a year during operation.
2, the packing seals at both ends of the dryer should be replaced in time according to the sealing conditions. The replacement of packing must be carried out under no-load parking conditions, and replacement during operation is not allowed.
3. The dryer shall not fall into any hard objects other than the material when feeding the cylinder, so as not to cause the blade shaft to jam and affect the normal operation of the equipment. Motors and electrical appliances are maintained and maintained in accordance with the corresponding instructions.
Note that after the sludge dryer is installed in place, you should check whether the bearing housing has been filled with grease before debugging. Otherwise, you should add an appropriate amount of grease. Before installing the rotary joint, carefully read the operating instructions of the rotary joint to ensure correct installation The gasket is damaged.
