1. After installing the hot air stove of the disc dryer, bake it with wood fire for 24 hours before entering the normal production operation. At the same time, before igniting the hot blast stove, the hot blast stove system and all electrical appliances must be carefully checked, and it can be ignited and operated only when there is no abnormality. This is one of the correct use methods of the hot blast stove of the slime dryer, and it is also an important prerequisite to ensure the service life of the hot blast stove of the slime dryer.
2. After the hot blast stove of the disc dryer is ignited, the hot blast stove should be preheated by a small fire combustion method, and the intensive combustion can be carried out after all preheating is completed. In this process, it is necessary to ensure that the air volume of the induced draft fan is gradually increased from small to large.
3. When the coal slime dryer hot blast stove is operating normally, it should be noted that the air supply temperature of the hand-burning stove is generally between 350-450. When the air temperature is lower than 350, the air volume should be increased immediately. If the air temperature is higher than 450, the air volume should be reduced, and the temperature should be restored to normal operation.
4. If there is a sudden power failure during the operation of the disc dryer, quickly open the flue door, open the coal door and slag door, and continue to add water to the rotary drum sealing belt to prevent it from burning and causing the sealing failure. Severe consequences.
5. In the process of the hot blast stove of the disc dryer, the staff should always check whether there are burnt parts in the combustion chamber. If any damaged parts are found, they should be shut down and repaired before use.
6. In the normal operating state of the pan dryer, it is necessary to ensure that the hot blast stove operating system does not have any smoke or air leakage. If there is an abnormality, the cause should be found immediately and solved in time. When the slime dryer shuts down, the furnace temperature should be lowered to less than 300 degrees to avoid excessive temperature damage to the equipment.
