1. By adjusting the thickness of the material layer, the rotation speed of the main shaft, the number of bucket arms, the type and size of bucket blades, the drying process can be improved.
2. Each layer of drying tray can heat or cool the material by entering the heating medium or the cold medium independently, and the material temperature control is accurate and easy.
3. The residence time of materials can be precisely adjusted.
4. Single material flow direction, no back-mixing phenomenon, uniform drying, stable quality, no need to re-mix.
5. The operation of opening and stopping the dryer is very simple.
6. After the feeding is stopped, the conveying material scale rake leaves can quickly empty the material in the dryer.
7. Through the special large inspection door mirror, you can carefully clean and observe the inside of the equipment.
8. The material layer is thin, the spindle speed is low, and the material transmission system requires low power and power consumption.
9. Atmospheric pressure type: Due to the low airflow velocity in the equipment and the low humidity distribution in the equipment, it is difficult for dust to float to the top of the equipment, so the exhaust from the top wet exhaust port contains almost no dust.
10. Conduction heat drying, high thermal efficiency and low energy consumption.
11. Closed type: equipped with a solvent recovery device, which can easily recover organic solvents in moisture. The solvent recovery device of the utility model is simple and has a high recovery rate. For materials that are flammable, explosive, toxic, and easy to oxidize, nitrogen can be used as a moisture-carrying gas, and the closed-circuit cycle can ensure safe operation. It is especially suitable for dry, flammable, explosive and toxic materials.
12.Vacuum type: The tray dryer operated under vacuum is particularly suitable for drying heat-sensitive materials.
13. The dryer leaves the factory as a whole and is transported as a whole. It only needs to be hoisted in place, and the installation and positioning are very easy.
14. Due to the layered arrangement and vertical installation of the drying plate, even if the drying area is large, the floor space is also small.
