The reason why the bearing is hot: In the whole process of application, insufficient grease will cause the bearing to cause anxiety and friction during operation, and the bearing will be hot and damaged after the anxiety is damaged; the environmental acceptability of the blade dryer is relatively high. Therefore, efficient consumption can be carried out in different consumer markets. When the surrounding soot and raw material particles enter the bearing equipment, bearing stains will occur. If the bearing is not removed for a long time, the raw material soot will be deposited, resulting in the overheating of the paddle dryer bearing.
Solution for hot bearings: Pay attention to the conditioning and maintenance of the paddle dryer on time, and the addition and cleaning of lubricating agents according to the application cycle time of the machinery and equipment to ensure the coordination of bearing operation. When adding grease, pay attention to ensure that the grease is cleaned and added properly, and cannot add too much grease at one time to clean the bearing. When there is a lot of soot material accumulated inside the bearing, the bearing should be disassembled and completely removed immediately to prevent the bearing from being blocked due to excessive soot deposition.
The quality of the bearing operation determines the characteristics of the paddle dryer. The actual operation of the paddle dryer operation guide must be strictly implemented, and the bearing maintenance should be done on time, so that the greater advantages of the paddle dryer can be fully exerted and its Application period.
