The lack of lubricating agent during the operation of the tube-bundle dryer will result in the appearance of severe conflict during the operation of the bearing. After severe wear, the bearing will be heated and damaged; the operating environment of the tube-bundle dryer is highly applicable, so it can be used in Efficient consumption is carried out in the same consumption environment. When the adjacent dust material particles enter the bearing equipment, it will cause the bearing to be dirty. If the bearing is not cleaned for a long time, the material dust will accumulate, which constitutes the appearance of the tube bundle dryer bearing overheating.
Disposal method of bearing heating of tube bundle dryer: In the application of tube bundle dryer, attention should be paid to the maintenance and maintenance of the slag dryer on a regular basis. Lubricant is added and cleaned according to the equipment's operating cycle to ensure the operation of the bearing.
When adding lubricating agent, pay attention to ensure that the lubricating agent is clean, add it properly, and do not add too much at one time to form a lubricant overflow to purify the bearing. When a lot of dust materials accumulate inside the bearing, the bearing should be disassembled in time for thorough cleaning to prevent excessive accumulation of dust and block the bearing.
