The lack of lubricating agent during the operation of the tube-bundle dryer will result in the appearance of severe conflict during the operation of the bearing. After severe wear, the bearing will be heated and damaged; the operating environment of the tube-bundle dryer is highly applicable, so it can be Efficient consumption in the same consumption environment. When the adjacent dust material particles enter the bearing equipment, it will cause the bearing to be dirty. If the bearing is not cleaned for a long time, the material dust will accumulate, which constitutes the appearance of overheating of the tube bundle dryer bearing.
Disposal method of bearing heating of tube bundle dryer: In the application of tube bundle dryer, attention should be paid to the maintenance and maintenance of the slag dryer, and the addition and cleaning of lubricating agent should be carried out according to the operation cycle of the equipment to ensure the operation of the bearing. flexibility.
When adding lubricating agent, pay attention to ensure that the lubricating agent is clean and add it properly. Do not add too much at one time to form a lubricating oil overflow to purify the bearing. When a lot of dust materials accumulate inside the bearing, the bearing should be disassembled in time for thorough cleaning to prevent excessive accumulation of dust and block the bearing.https://www.stordworkshop.com/
