1. Quick opening structure, sludge dryer sludge dryer in an instant positioning card, without any tools can be easily assembled and disassembled sludge dryer parts, easy to operate, save a lot of time to deal with and troubleshoot ;
2. Set up monitoring aircraft and imaging equipment to observe the position of the dry state in time, and then transmit the dry state to the monitoring machine in the central control room, so that the operator can grasp the dry state and fail to discover it in time;
3. Select the appropriate filter, the impurities in the feed solution of the filter, the selection of the filter screen and the diameter of the sludge dryer population channel and the microporous filter mesh diameter are usually selected by the sludge dryer inlet channel or pore size 0.2 times.
4. When the pressure of the driven high-pressure pump is used, the pressure of the gas or the dual functions of the composite sludge dehydrator, the airflow sludge dehydrator and the pressure type sludge dehydrator of the sludge dehydrator have not yet reached the compressed air The pressure during drying until the compression of the high-pressure pump in normal operation.https://www.stordworkshop.com/
